wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected
CVSS score
7.1
EPSS probability
%0.3
Risk score
0.0
Published
10 mo ago
Resmî kaynaklarda yeterli kanıt bulunamadı. Bu sonuç “yama yok” anlamına gelmez.
Impact on My Inventory
Only the personal products you have added to your account are assessed; an organisation's inventory does not appear here.
Checking session…
Vulnerability description
DayBreach CVE AI Research
CVE-2022-50665 has vendor, distribution, patch and security-source records on file. We can compare them and prepare an explanation linked to the evidence.
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
IMPACT: Affected Products and Software
RED HAT CSAF/VEX: Product Impact Check
SCORING: CVSS from Multiple Sources
CVSS Scores
The Common Vulnerability Scoring System is a standardised framework for assessing the severity of vulnerabilities in software and systems. We collect and display CVSS scores from several sources for each CVE.
| SCORE | VERSION | SEVERITY | VECTOR | SOURCE |
|---|---|---|---|---|
| 7.1 | CVSS V3_1 | HIGH | CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H | CVE CNA |
| 7.1 | CVSS V31 | HIGH | CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H | NVD |
Patch and Remediation Guide
Solution & Remediation Advisory
İncelenen resmî kaynaklarda yama durumu doğrulanamadı. Bu sonuç “yama yok” anlamına gelmez.
Public exploit and active exploitation status
Verified exploit intelligence
No verified public PoC, exploit repository or Metasploit module has been found for this CVE yet.
Weakness Classification and Attack Patterns (CWE & CAPEC)
CWE - Common Weakness Enumeration
While CVE identifies specific instances of vulnerabilities, CWE categorises the common flaws or weaknesses that can lead to vulnerabilities. CVE-2022-50665 is associated with the following CWEs:
Common Attack Pattern Enumeration and Classification (CAPEC)
Common Attack Pattern Enumeration and Classification (CAPEC) stores attack patterns, which are descriptions of the common attributes and approaches employed by adversaries to exploit the CVE-2022-50665 weaknesses.
Attack Vector and Accessibility
Official Sources and Advisories
CVSS Vector Radar Chart
7.1 / 10Vulnerability Scoring Details
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:HYama durumu bilinmiyor
Similar Vulnerabilities
Get this vulnerability through the API
Affected products, version ranges, exploitation status and patch information in a single request, with a free key.
curl -H "x-api-key: $DAYBREACH_API_KEY" \ "https://api.daybreach.dev/api/v1/intel/cves/CVE-2022-50665"