CVE Listesine Dön
CVE-2024-27080

btrfs: fix race when detecting delalloc ranges during fiemap

CVSS Skor

4.7

EPSS İhtimal

%0.2

Risk Skoru

0.0

Yayın

2 yıl önce

Resmî yama doğrulandı

Etkilenen ürün ve sürüm için yayımlanan güvenlik güncellemesini uygulayın.

Envanterimdeki Etkisi

Yalnızca hesabınıza eklediğiniz kişisel ürünler değerlendirilir; kurumsal envanter burada görünmez.

Oturum kontrol ediliyor…

Zafiyet Açıklaması

DayBreach CVE AI Araştırması

CVE-2024-27080 için toplanan üretici, dağıtım, yama ve güvenlik kaynağı kayıtlarını karşılaştırıp kanıt bağlantılı bir açıklama hazırlayalım.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race when detecting delalloc ranges during fiemap For fiemap we recently stopped locking the target extent range for the whole duration of the fiemap call, in order to avoid a deadlock in a scenario where the fiemap buffer happens to be a memory mapped range of the same file. This use case is very unlikely to be useful in practice but it may be triggered by fuzz testing (syzbot, etc). This however introduced a race that makes us miss delalloc ranges for file regions that are currently holes, so the caller of fiemap will not be aware that there's data for some file regions. This can be quite serious for some use cases - for example in coreutils versions before 9.0, the cp program used fiemap to detect holes and data in the source file, copying only regions with data (extents or delalloc) from the source file to the destination file in order to preserve holes (see the documentation for its --sparse command line option). This means that if cp was used with a source file that had delalloc in a hole, the destination file could end up without that data, which is effectively a data loss issue, if it happened to hit the race described below. The race happens like this: 1) Fiemap is called, without the FIEMAP_FLAG_SYNC flag, for a file that has delalloc in the file range [64M, 65M[, which is currently a hole; 2) Fiemap locks the inode in shared mode, then starts iterating the inode's subvolume tree searching for file extent items, without having the whole fiemap target range locked in the inode's io tree - the change introduced recently by commit b0ad381fa769 ("btrfs: fix deadlock with fiemap and extent locking"). It only locks ranges in the io tree when it finds a hole or prealloc extent since that commit; 3) Note that fiemap clones each leaf before using it, and this is to avoid deadlocks when locking a file range in the inode's io tree and the fiemap buffer is memory mapped to some file, because writing to the page with btrfs_page_mkwrite() will wait on any ordered extent for the page's range and the ordered extent needs to lock the range and may need to modify the same leaf, therefore leading to a deadlock on the leaf; 4) While iterating the file extent items in the cloned leaf before finding the hole in the range [64M, 65M[, the delalloc in that range is flushed and its ordered extent completes - meaning the corresponding file extent item is in the inode's subvolume tree, but not present in the cloned leaf that fiemap is iterating over; 5) When fiemap finds the hole in the [64M, 65M[ range by seeing the gap in the cloned leaf (or a file extent item with disk_bytenr == 0 in case the NO_HOLES feature is not enabled), it will lock that file range in the inode's io tree and then search for delalloc by checking for the EXTENT_DELALLOC bit in the io tree for that range and ordered extents (with btrfs_find_delalloc_in_range()). But it finds nothing since the delalloc in that range was already flushed and the ordered extent completed and is gone - as a result fiemap will not report that there's delalloc or an extent for the range [64M, 65M[, so user space will be mislead into thinking that there's a hole in that range. This could actually be sporadically triggered with test case generic/094 from fstests, which reports a missing extent/delalloc range like this: generic/094 2s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad) --- tests/generic/094.out 2020-06-10 19:29:03.830519425 +0100 +++ /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad 2024-02-28 11:00:00.381071525 +0000 @@ -1,3 +1,9 @@ QA output created by 094 fiemap run with sync fiemap run without sync +ERROR: couldn't find extent at 7 +map is 'HHDDHPPDPHPH' +logical: [ 5.. 6] phys: ---truncated---

IMPACT — Etkilenen Ürünler ve Yazılımlar

Affected Products

The following products are affected by CVE-2024-27080 vulnerability. Even if our threat engine is aware of the exact versions of the products that are affected, the information is represented below.

IDVENDORPRODUCTACTION
1linuxLinux İncele
2linuxLinux İncele
3linuxlinux kernel İncele
4linuxlinux kernel İncele
5linuxlinux kernel İncele
6linuxlinux kernel İncele
Total Affected Vendor: 1|Products: 6

RED HAT CSAF/VEX — Ürün Etki Kontrolü

Red Hat bu CVE için henüz bir CSAF/VEX etki kaydı yayımlamamış. Bu durum “etkilenmiyor” anlamına gelmez.

SCORING — CVSS Çoklu Kaynak Skoru

CVSS Scores

The Common Vulnerability Scoring System is a standardized framework for assessing the severity of vulnerabilities in software and systems. We collect and display CVSS scores from various sources for each CVE.

SCOREVERSIONSEVERITYVECTORSOURCE
4.7CVSS V31MEDIUMCVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:HNVD

Yama ve İyileştirme Rehberi (Solution)

Solution & Remediation Advisory

Yama doğrulandı

3 doğrulanmış yama veya düzeltilmiş sürüm kanıtı bulundu.

nvd

NVD tarafından Patch olarak etiketlenmiş referans

Kaynağı aç
nvd

NVD tarafından Patch olarak etiketlenmiş referans

Kaynağı aç
nvd

NVD tarafından Patch olarak etiketlenmiş referans

Kaynağı aç
Etkilenen ürün ve sürümü yukarıdaki kaynak kanıtlarıyla doğrulayın.
İnternete açık servislerde erişimi kısıtlayın ve ağ segmentasyonu uygulayın.
Kanıtta belirtilen resmî güncellemeyi yalnızca eşleşen ürün ve sürüme uygulayın.
Sunucu günlüklerini ve ağ uçlarını anormal çalıştırma belirtileri için izleyin.

Public exploit ve aktif sömürü durumu

Doğrulanmış exploit istihbaratı

Bu CVE için henüz doğrulanmış public PoC, exploit repository’si veya Metasploit modülü bulunamadı.

Zafiyet Dağılımı ve Saldırı Kalıpları (CWE & CAPEC)

CWE - Common Weakness Enumeration

While CVE identifies specific instances of vulnerabilities, CWE categorizes the common flaws or weaknesses that can lead to vulnerabilities. CVE-2024-27080 is associated with the following CWEs:

Common Attack Pattern Enumeration and Classification (CAPEC)

Common Attack Pattern Enumeration and Classification (CAPEC) stores attack patterns, which are descriptions of the common attributes and approaches employed by adversaries to exploit the CVE-2024-27080 weaknesses.

Saldırı Vektörü ve Erişilebilirlik Karakteristiği

ErişimYerel erişim
YetkiDüşük
KullanıcıGerekmiyor

Resmi Kaynaklar ve Danışma Bültenleri

CVSS Vektör Radar Grafiği

4.7 / 10
Attack VectorLocalComplexityHighPrivilegesLowUser Interact.NoneConfidentialityHighIntegrityNoneAvailabilityHigh

Vulnerability Scoring Details

CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Attack VectorLocal (Yerel)
Attack ComplexityHigh (Yüksek)
Privileges RequiredLow (Düşük Yetki)
User InteractionNone (Gerekmiyor)
Confidentiality (Gizlilik)High (Yüksek)
Integrity (Bütünlük)None (Yok)
Availability (Erişilebilirlik)High (Yüksek)

Yama doğrulandı

3 doğrulanmış yama veya düzeltilmiş sürüm kanıtı bulundu.

Üreticiyi takip et

L
linux logo
linux

Zafiyet Türü (CWE & CAPEC)

İlgili Benzer Açıklar

Bu açığı API ile alın

Etkilenen ürünler, sürüm aralıkları, istismar durumu ve yama bilgisi tek istekte; ücretsiz anahtarla.

curl -H "x-api-key: $DAYBREACH_API_KEY" \
  "https://api.daybreach.dev/api/v1/intel/cves/CVE-2024-27080"